Steering Wheel control Primary harness adapters convert the commands from your car's steering wheel controls to a code that an aftermarket radio can recognize. A patch lead is also requires for SWC type systems based on the brand of head unit you have. for more details check out our you tube video. http://aerpro.com/video/control_harness_installation

CHSU14C Steering wheel control interface to suit Subaru - various models with camera retention

With Camera Retention

Description:

The Aerpro CHSU14C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls. Engineered to suit various Subaru vehicles, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket headunit is simplified even further when paired with the optional Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead, which connects between the aftermarket headunit and the Aerpro Steering Wheel Control Interface. This interface provides various outputs including Reverse Trigger and Park Brake. The interface also retains the OEM reverse camera (if equipped) when connected to compatible aftermarket headunits.

Please Note:
- Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
- A Steering Wheel Control Patch Lead is required to be used in conjunction with this part to enable Steering Wheel Controls to function (sold separately).
- Aftermarket headunit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
- Retains the OEM Reverse Camera (if fitted to the vehicle) and enables it to display on compatible aftermarket AV headunits (with an RCA camera input).
Dipswitch #1 ON (UP) is configured for vehicles using Subaru codes (default setting): Forester (2015 - 2018), Impreza (2015 - 2016), Outback (2015 - 2018) WRX (2016 - 2018), Outback (2007 - 2014), Levorg (2015 - 2018) & XV (2012 - 2017).
Dipswitch #1 OFF (DOWN) is configured for vehicles using Toyota codes: Liberty 09-14, Outback 09-14

Features:

Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
Supports OEM Phone Button when connected to compatible aftermarket bluetooth headunits
Retains OEM Reverse Camera (if equipped) when connected to a compatible aftermarket AV headunit
Provides output feeds for park brake and reverse gear
Fitted with a vehicle specific plug, no cutting of wires required
Recommended to be installed with an Aerpro APP9 Headunit Secondary ISO Harness & SWC Patch Lead (sold separately)
Requires SWC patch lead to provide compatibility with the aftermarket headunit (sold separately)

Specs:

INTERFACE TYPE: ANALOGUE
PATCH LEAD TYPE: C
PHONE BUTTON COMPATIBILITY: YES
VOICE ASSISTANT BUTTON SUPPORT: NO
OUTPUTS:
- REVERSE TRIGGER: YES (PURPLE)
- PARK BRAKE: YES (GREEN)
- SPEED PULSE: NO
- ILLUMINATION: NO
- AMP REMOTE: NO
- TELEPHONE MUTE: NO
OTHER RETENTION:
- OEM AMPLIFIED SYSTEM: NO
- OEM AV SOCKET: YES
NOTES:
- Aftermarket headunit must be SWC compatible.
- SWC patch lead is also required to enable SWC (sold separately).
- Retains the OEM Reverse Camera (if fitted to the vehicle) and enables it to display on compatible aftermarket AV headunits (with an RCA camera input).
- Disregard 5 pin Camera plug if not present in vehicle as camera signal is also wired though main plug.